Logo Search packages:      
Sourcecode: maxdb-buildtools version File versions


/* flexdef - definitions file for flex */

 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 * This code is derived from software contributed to Berkeley by
 * Vern Paxson.
 * The United States Government has rights in this work pursuant
 * to contract no. DE-AC03-76SF00098 between the United States
 * Department of Energy and the University of California.
 * Redistribution and use in source and binary forms with or without
 * modification are permitted provided that: (1) source distributions retain
 * this entire copyright notice and comment, and (2) distributions including
 * binaries display the following acknowledgement:  ``This product includes
 * software developed by the University of California, Berkeley and its
 * contributors'' in the documentation or other materials provided with the
 * distribution and in all advertising materials mentioning features or use
 * of this software.  Neither the name of the University nor the names of
 * its contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.

/* @(#) $Header: /home/daffy/u0/vern/flex/RCS/flexdef.h,v 2.53 95/04/20 11:17:36 vern Exp $ (LBL) */

#include <stdio.h>
#include <ctype.h>

#include "config.h"

#ifdef __TURBOC__
#define HAVE_STRING_H 1
#define MS_DOS 1
#ifndef __STDC__
#define __STDC__ 1
 #pragma warn -pro
 #pragma warn -rch
 #pragma warn -use
 #pragma warn -aus
 #pragma warn -par
 #pragma warn -pia

#include <string.h>
#include <strings.h>

#include <sys/types.h>

#include <malloc.h>

#include <stdlib.h>

/* As an aid for the internationalization patch to flex, which
 * is maintained outside this distribution for copyright reasons.
#define _(String) (String)

/* Always be prepared to generate an 8-bit scanner. */
#define CSIZE 256
#define Char unsigned char

/* Size of input alphabet - should be size of ASCII set. */
#define DEFAULT_CSIZE 128

#ifndef PROTO
#if __STDC__
#define PROTO(proto) proto
#define PROTO(proto) ()

#ifdef VMS
#ifndef __VMS_POSIX
#define unlink remove

#ifdef MS_DOS

/* Maximum line length we'll have to deal with. */
#define MAXLINE 2048

#ifndef MIN
#define MIN(x,y) ((x) < (y) ? (x) : (y))
#ifndef MAX
#define MAX(x,y) ((x) > (y) ? (x) : (y))
#ifndef ABS
#define ABS(x) ((x) < 0 ? -(x) : (x))

/* ANSI C does not guarantee that isascii() is defined */
#ifndef isascii
#define isascii(c) ((c) <= 0177)

#define true 1
#define false 0
#define unspecified -1

/* Special chk[] values marking the slots taking by end-of-buffer and action
 * numbers.
#define EOB_POSITION -1

/* Number of data items per line for -f output. */

/* Number of lines of data in -f output before inserting a blank line for
 * readability.

/* transition_struct_out() definitions. */

/* Returns true if an nfa state has an epsilon out-transition slot
 * that can be used.  This definition is currently not used.
#define FREE_EPSILON(state) \
      (transchar[state] == SYM_EPSILON && \
       trans2[state] == NO_TRANSITION && \
       finalst[state] != state)

/* Returns true if an nfa state has an epsilon out-transition character
 * and both slots are free
#define SUPER_FREE_EPSILON(state) \
      (transchar[state] == SYM_EPSILON && \
       trans1[state] == NO_TRANSITION) \

/* Maximum number of NFA states that can comprise a DFA state.  It's real
 * big because if there's a lot of rules, the initial state will have a
 * huge epsilon closure.

/* A note on the following masks.  They are used to mark accepting numbers
 * as being special.  As such, they implicitly limit the number of accepting
 * numbers (i.e., rules) because if there are too many rules the rule numbers
 * will overload the mask bits.  Fortunately, this limit is \large/ (0x2000 ==
 * 8192) so unlikely to actually cause any problems.  A check is made in
 * new_rule() to ensure that this limit is not reached.

/* Mask to mark a trailing context accepting number. */
#define YY_TRAILING_MASK 0x2000

/* Mask to mark the accepting number of the "head" of a trailing context
 * rule.
#define YY_TRAILING_HEAD_MASK 0x4000

/* Maximum number of rules, as outlined in the above note. */

/* NIL must be 0.  If not, its special meaning when making equivalence classes
 * (it marks the representative of a given e.c.) will be unidentifiable.
#define NIL 0

#define JAM -1    /* to mark a missing DFA transition */
#define UNIQUE -1 /* marks a symbol as an e.c. representative */
#define INFINITY -1     /* for x{5,} constructions */

#define INITIAL_MAX_CCLS 100  /* max number of unique character classes */

/* Size of table holding members of character classes. */

#define INITIAL_MAX_RULES 100 /* default maximum number of rules */

#define INITIAL_MNS 2000      /* default maximum number of nfa states */
#define MNS_INCREMENT 1000    /* amount to bump above by if it's not enough */

#define INITIAL_MAX_DFAS 1000 /* default maximum number of dfa states */

#define JAMSTATE -32766 /* marks a reference to the state that always jams */

/* Maximum number of NFA states. */
#define MAXIMUM_MNS 31999

/* Enough so that if it's subtracted from an NFA state number, the result
 * is guaranteed to be negative.

/* Maximum number of nxt/chk pairs for non-templates. */

/* Maximum number of nxt/chk pairs needed for templates. */

#define SYM_EPSILON (CSIZE + 1)     /* to mark transitions on the symbol epsilon */

#define INITIAL_MAX_SCS 40    /* maximum number of start conditions */
#define MAX_SCS_INCREMENT 40  /* amount to bump by if it's not enough */

#define ONE_STACK_SIZE 500    /* stack of states with only one out-transition */
#define SAME_TRANS -1   /* transition is the same as "default" entry for state */

/* The following percentages are used to tune table compression:

 * The percentage the number of out-transitions a state must be of the
 * number of equivalence classes in order to be considered for table
 * compaction by using protos.

/* The percentage the number of homogeneous out-transitions of a state
 * must be of the number of total out-transitions of the state in order
 * that the state's transition table is first compared with a potential 
 * template of the most common out-transition instead of with the first
 * proto in the proto queue.

/* The percentage the number of differences between a state's transition
 * table and the proto it was first compared with must be of the total
 * number of out-transitions of the state in order to keep the first
 * proto as a good match and not search any further.

/* The percentage the number of differences between a state's transition
 * table and the most similar proto must be of the state's total number
 * of out-transitions to use the proto as an acceptable close match.

/* The percentage the number of homogeneous out-transitions of a state
 * must be of the number of total out-transitions of the state in order
 * to consider making a template from the state.

/* The percentage the number of differences between a state's transition
 * table and the most similar proto must be of the state's total number
 * of out-transitions to create a new proto from the state.

/* The percentage the total number of out-transitions of a state must be
 * of the number of equivalence classes in order to consider trying to
 * fit the transition table into "holes" inside the nxt/chk table.

/* Size of region set aside to cache the complete transition table of
 * protos on the proto queue to enable quick comparisons.
#define PROT_SAVE_SIZE 2000

#define MSP 50    /* maximum number of saved protos (protos on the proto queue) */

/* Maximum number of out-transitions a state can have that we'll rummage
 * around through the interior of the internal fast table looking for a
 * spot for it.

/* Maximum number of rules which will be reported as being associated
 * with a DFA state.
#define MAX_ASSOC_RULES 100

/* Number that, if used to subscript an array, has a good chance of producing
 * an error; should be small enough to fit into a short.
#define BAD_SUBSCRIPT -32767

/* Absolute value of largest number that can be stored in a short, with a
 * bit of slop thrown in for general paranoia.
#define MAX_SHORT 32700

/* Declarations for global variables. */

/* Variables for symbol tables:
 * sctbl - start-condition symbol table
 * ndtbl - name-definition symbol table
 * ccltab - character class text symbol table

struct hash_entry
      struct hash_entry *prev, *next;
      char *name;
      char *str_val;
      int int_val;
      } ;

typedef struct hash_entry **hash_table;

#define CCL_HASH_SIZE 101

extern struct hash_entry *ndtbl[NAME_TABLE_HASH_SIZE]; 
extern struct hash_entry *sctbl[START_COND_HASH_SIZE];
extern struct hash_entry *ccltab[CCL_HASH_SIZE];

/* Variables for flags:
 * printstats - if true (-v), dump statistics
 * syntaxerror - true if a syntax error has been found
 * eofseen - true if we've seen an eof in the input file
 * ddebug - if true (-d), make a "debug" scanner
 * trace - if true (-T), trace processing
 * nowarn - if true (-w), do not generate warnings
 * spprdflt - if true (-s), suppress the default rule
 * interactive - if true (-I), generate an interactive scanner
 * caseins - if true (-i), generate a case-insensitive scanner
 * lex_compat - if true (-l), maximize compatibility with AT&T lex
 * do_yylineno - if true, generate code to maintain yylineno
 * useecs - if true (-Ce flag), use equivalence classes
 * fulltbl - if true (-Cf flag), don't compress the DFA state table
 * usemecs - if true (-Cm flag), use meta-equivalence classes
 * fullspd - if true (-F flag), use Jacobson method of table representation
 * gen_line_dirs - if true (i.e., no -L flag), generate #line directives
 * performance_report - if > 0 (i.e., -p flag), generate a report relating
 *   to scanner performance; if > 1 (-p -p), report on minor performance
 *   problems, too
 * backing_up_report - if true (i.e., -b flag), generate "lex.backup" file
 *   listing backing-up states
 * C_plus_plus - if true (i.e., -+ flag), generate a C++ scanner class;
 *   otherwise, a standard C scanner
 * long_align - if true (-Ca flag), favor long-word alignment.
 * use_read - if true (-f, -F, or -Cr) then use read() for scanner input;
 *   otherwise, use fread().
 * yytext_is_array - if true (i.e., %array directive), then declare
 *   yytext as a array instead of a character pointer.  Nice and inefficient.
 * do_yywrap - do yywrap() processing on EOF.  If false, EOF treated as
 *   "no more files".
 * csize - size of character set for the scanner we're generating;
 *   128 for 7-bit chars and 256 for 8-bit
 * yymore_used - if true, yymore() is used in input rules
 * reject - if true, generate back-up tables for REJECT macro
 * real_reject - if true, scanner really uses REJECT (as opposed to just
 *   having "reject" set for variable trailing context)
 * continued_action - true if this rule's action is to "fall through" to
 *   the next rule's action (i.e., the '|' action)
 * in_rule - true if we're inside an individual rule, false if not.
 * yymore_really_used - whether to treat yymore() as really used, regardless
 *   of what we think based on references to it in the user's actions.
 * reject_really_used - same for REJECT

extern int printstats, syntaxerror, eofseen, ddebug, trace, nowarn, spprdflt;
extern int interactive, caseins, lex_compat, do_yylineno;
extern int useecs, fulltbl, usemecs, fullspd;
extern int gen_line_dirs, performance_report, backing_up_report;
extern int C_plus_plus, long_align, use_read, yytext_is_array, do_yywrap;
extern int csize;
extern int yymore_used, reject, real_reject, continued_action, in_rule;

extern int yymore_really_used, reject_really_used;

/* Variables used in the flex input routines:
 * datapos - characters on current output line
 * dataline - number of contiguous lines of data in current data
 *    statement.  Used to generate readable -f output
 * linenum - current input line number
 * out_linenum - current output line number
 * skelfile - the skeleton file
 * skel - compiled-in skeleton array
 * skel_ind - index into "skel" array, if skelfile is nil
 * yyin - input file
 * backing_up_file - file to summarize backing-up states to
 * infilename - name of input file
 * outfilename - name of output file
 * did_outfilename - whether outfilename was explicitly set
 * prefix - the prefix used for externally visible names ("yy" by default)
 * yyclass - yyFlexLexer subclass to use for YY_DECL
 * do_stdinit - whether to initialize yyin/yyout to stdin/stdout
 * use_stdout - the -t flag
 * input_files - array holding names of input files
 * num_input_files - size of input_files array
 * program_name - name with which program was invoked 
 * action_array - array to hold the rule actions
 * action_size - size of action_array
 * defs1_offset - index where the user's section 1 definitions start
 *    in action_array
 * prolog_offset - index where the prolog starts in action_array
 * action_offset - index where the non-prolog starts in action_array
 * action_index - index where the next action should go, with respect
 *    to "action_array"

extern int datapos, dataline, linenum, out_linenum;
extern FILE *skelfile, *yyin, *backing_up_file;
extern const char *skel[];
extern int skel_ind;
extern char *infilename, *outfilename;
extern int did_outfilename;
extern char *prefix, *yyclass;
extern int do_stdinit, use_stdout;
extern char **input_files;
extern int num_input_files;
extern char *program_name;

extern char *action_array;
extern int action_size;
extern int defs1_offset, prolog_offset, action_offset, action_index;

/* Variables for stack of states having only one out-transition:
 * onestate - state number
 * onesym - transition symbol
 * onenext - target state
 * onedef - default base entry
 * onesp - stack pointer

extern int onestate[ONE_STACK_SIZE], onesym[ONE_STACK_SIZE];
extern int onenext[ONE_STACK_SIZE], onedef[ONE_STACK_SIZE], onesp;

/* Variables for nfa machine data:
 * current_mns - current maximum on number of NFA states
 * num_rules - number of the last accepting state; also is number of
 *    rules created so far
 * num_eof_rules - number of <<EOF>> rules
 * default_rule - number of the default rule
 * current_max_rules - current maximum number of rules
 * lastnfa - last nfa state number created
 * firstst - physically the first state of a fragment
 * lastst - last physical state of fragment
 * finalst - last logical state of fragment
 * transchar - transition character
 * trans1 - transition state
 * trans2 - 2nd transition state for epsilons
 * accptnum - accepting number
 * assoc_rule - rule associated with this NFA state (or 0 if none)
 * state_type - a STATE_xxx type identifying whether the state is part
 *    of a normal rule, the leading state in a trailing context
 *    rule (i.e., the state which marks the transition from
 *    recognizing the text-to-be-matched to the beginning of
 *    the trailing context), or a subsequent state in a trailing
 *    context rule
 * rule_type - a RULE_xxx type identifying whether this a ho-hum
 *    normal rule or one which has variable head & trailing
 *    context
 * rule_linenum - line number associated with rule
 * rule_useful - true if we've determined that the rule can be matched

extern int current_mns, current_max_rules;
extern int num_rules, num_eof_rules, default_rule, lastnfa;
extern int *firstst, *lastst, *finalst, *transchar, *trans1, *trans2;
extern int *accptnum, *assoc_rule, *state_type;
extern int *rule_type, *rule_linenum, *rule_useful;

/* Different types of states; values are useful as masks, as well, for
 * routines like check_trailing_context().
#define STATE_NORMAL 0x1

/* Global holding current type of state we're making. */

extern int current_state_type;

/* Different types of rules. */
#define RULE_NORMAL 0

/* True if the input rules include a rule with both variable-length head
 * and trailing context, false otherwise.
extern int variable_trailing_context_rules;

/* Variables for protos:
 * numtemps - number of templates created
 * numprots - number of protos created
 * protprev - backlink to a more-recently used proto
 * protnext - forward link to a less-recently used proto
 * prottbl - base/def table entry for proto
 * protcomst - common state of proto
 * firstprot - number of the most recently used proto
 * lastprot - number of the least recently used proto
 * protsave contains the entire state array for protos

extern int numtemps, numprots, protprev[MSP], protnext[MSP], prottbl[MSP];
extern int protcomst[MSP], firstprot, lastprot, protsave[PROT_SAVE_SIZE];

/* Variables for managing equivalence classes:
 * numecs - number of equivalence classes
 * nextecm - forward link of Equivalence Class members
 * ecgroup - class number or backward link of EC members
 * nummecs - number of meta-equivalence classes (used to compress
 *   templates)
 * tecfwd - forward link of meta-equivalence classes members
 * tecbck - backward link of MEC's

/* Reserve enough room in the equivalence class arrays so that we
 * can use the CSIZE'th element to hold equivalence class information
 * for the NUL character.  Later we'll move this information into
 * the 0th element.
extern int numecs, nextecm[CSIZE + 1], ecgroup[CSIZE + 1], nummecs;

/* Meta-equivalence classes are indexed starting at 1, so it's possible
 * that they will require positions from 1 .. CSIZE, i.e., CSIZE + 1
 * slots total (since the arrays are 0-based).  nextecm[] and ecgroup[]
 * don't require the extra position since they're indexed from 1 .. CSIZE - 1.
extern int tecfwd[CSIZE + 1], tecbck[CSIZE + 1];

/* Variables for start conditions:
 * lastsc - last start condition created
 * current_max_scs - current limit on number of start conditions
 * scset - set of rules active in start condition
 * scbol - set of rules active only at the beginning of line in a s.c.
 * scxclu - true if start condition is exclusive
 * sceof - true if start condition has EOF rule
 * scname - start condition name

extern int lastsc, *scset, *scbol, *scxclu, *sceof;
extern int current_max_scs;
extern char **scname;

/* Variables for dfa machine data:
 * current_max_dfa_size - current maximum number of NFA states in DFA
 * current_max_xpairs - current maximum number of non-template xtion pairs
 * current_max_template_xpairs - current maximum number of template pairs
 * current_max_dfas - current maximum number DFA states
 * lastdfa - last dfa state number created
 * nxt - state to enter upon reading character
 * chk - check value to see if "nxt" applies
 * tnxt - internal nxt table for templates
 * base - offset into "nxt" for given state
 * def - where to go if "chk" disallows "nxt" entry
 * nultrans - NUL transition for each state
 * NUL_ec - equivalence class of the NUL character
 * tblend - last "nxt/chk" table entry being used
 * firstfree - first empty entry in "nxt/chk" table
 * dss - nfa state set for each dfa
 * dfasiz - size of nfa state set for each dfa
 * dfaacc - accepting set for each dfa state (if using REJECT), or accepting
 *    number, if not
 * accsiz - size of accepting set for each dfa state
 * dhash - dfa state hash value
 * numas - number of DFA accepting states created; note that this
 *    is not necessarily the same value as num_rules, which is the analogous
 *    value for the NFA
 * numsnpairs - number of state/nextstate transition pairs
 * jambase - position in base/def where the default jam table starts
 * jamstate - state number corresponding to "jam" state
 * end_of_buffer_state - end-of-buffer dfa state number

extern int current_max_dfa_size, current_max_xpairs;
extern int current_max_template_xpairs, current_max_dfas;
extern int lastdfa, *nxt, *chk, *tnxt;
extern int *base, *def, *nultrans, NUL_ec, tblend, firstfree, **dss, *dfasiz;
extern union dfaacc_union
      int *dfaacc_set;
      int dfaacc_state;
      } *dfaacc;
extern int *accsiz, *dhash, numas;
extern int numsnpairs, jambase, jamstate;
extern int end_of_buffer_state;

/* Variables for ccl information:
 * lastccl - ccl index of the last created ccl
 * current_maxccls - current limit on the maximum number of unique ccl's
 * cclmap - maps a ccl index to its set pointer
 * ccllen - gives the length of a ccl
 * cclng - true for a given ccl if the ccl is negated
 * cclreuse - counts how many times a ccl is re-used
 * current_max_ccl_tbl_size - current limit on number of characters needed
 *    to represent the unique ccl's
 * ccltbl - holds the characters in each ccl - indexed by cclmap

extern int lastccl, *cclmap, *ccllen, *cclng, cclreuse;
extern int current_maxccls, current_max_ccl_tbl_size;
extern Char *ccltbl;

/* Variables for miscellaneous information:
 * nmstr - last NAME scanned by the scanner
 * sectnum - section number currently being parsed
 * nummt - number of empty nxt/chk table entries
 * hshcol - number of hash collisions detected by snstods
 * dfaeql - number of times a newly created dfa was equal to an old one
 * numeps - number of epsilon NFA states created
 * eps2 - number of epsilon states which have 2 out-transitions
 * num_reallocs - number of times it was necessary to realloc() a group
 *      of arrays
 * tmpuses - number of DFA states that chain to templates
 * totnst - total number of NFA states used to make DFA states
 * peakpairs - peak number of transition pairs we had to store internally
 * numuniq - number of unique transitions
 * numdup - number of duplicate transitions
 * hshsave - number of hash collisions saved by checking number of states
 * num_backing_up - number of DFA states requiring backing up
 * bol_needed - whether scanner needs beginning-of-line recognition

extern char nmstr[MAXLINE];
extern int sectnum, nummt, hshcol, dfaeql, numeps, eps2, num_reallocs;
extern int tmpuses, totnst, peakpairs, numuniq, numdup, hshsave;
extern int num_backing_up, bol_needed;

void *allocate_array PROTO((int, size_t));
void *reallocate_array PROTO((void*, int, size_t));

void *flex_alloc PROTO((size_t));
void *flex_realloc PROTO((void*, size_t));
void flex_free PROTO((void*));

#define allocate_integer_array(size) \
      (int *) allocate_array( size, sizeof( int ) )

#define reallocate_integer_array(array,size) \
      (int *) reallocate_array( (void *) array, size, sizeof( int ) )

#define allocate_int_ptr_array(size) \
      (int **) allocate_array( size, sizeof( int * ) )

#define allocate_char_ptr_array(size) \
      (char **) allocate_array( size, sizeof( char * ) )

#define allocate_dfaacc_union(size) \
      (union dfaacc_union *) \
            allocate_array( size, sizeof( union dfaacc_union ) )

#define reallocate_int_ptr_array(array,size) \
      (int **) reallocate_array( (void *) array, size, sizeof( int * ) )

#define reallocate_char_ptr_array(array,size) \
      (char **) reallocate_array( (void *) array, size, sizeof( char * ) )

#define reallocate_dfaacc_union(array, size) \
      (union dfaacc_union *) \
      reallocate_array( (void *) array, size, sizeof( union dfaacc_union ) )

#define allocate_character_array(size) \
      (char *) allocate_array( size, sizeof( char ) )

#define reallocate_character_array(array,size) \
      (char *) reallocate_array( (void *) array, size, sizeof( char ) )

#define allocate_Character_array(size) \
      (Char *) allocate_array( size, sizeof( Char ) )

#define reallocate_Character_array(array,size) \
      (Char *) reallocate_array( (void *) array, size, sizeof( Char ) )

/* Used to communicate between scanner and parser.  The type should really
 * be YYSTYPE, but we can't easily get our hands on it.
extern int yylval;

/* External functions that are cross-referenced among the flex source files. */

/* from file ccl.c */

extern void ccladd PROTO((int, int));     /* add a single character to a ccl */
extern int cclinit PROTO((void));   /* make an empty ccl */
extern void cclnegate PROTO((int)); /* negate a ccl */

/* List the members of a set of characters in CCL form. */
extern void list_character_set PROTO((FILE*, int[]));

/* from file dfa.c */

/* Check a DFA state for backing up. */
extern void check_for_backing_up PROTO((int, int[]));

/* Check to see if NFA state set constitutes "dangerous" trailing context. */
extern void check_trailing_context PROTO((int*, int, int*, int));

/* Construct the epsilon closure of a set of ndfa states. */
extern int *epsclosure PROTO((int*, int*, int[], int*, int*));

/* Increase the maximum number of dfas. */
extern void increase_max_dfas PROTO((void));

extern void ntod PROTO((void));     /* convert a ndfa to a dfa */

/* Converts a set of ndfa states into a dfa state. */
extern int snstods PROTO((int[], int, int[], int, int, int*));

/* from file ecs.c */

/* Convert character classes to set of equivalence classes. */
extern void ccl2ecl PROTO((void));

/* Associate equivalence class numbers with class members. */
extern int cre8ecs PROTO((int[], int[], int));

/* Update equivalence classes based on character class transitions. */
extern void mkeccl PROTO((Char[], int, int[], int[], int, int));

/* Create equivalence class for single character. */
extern void mkechar PROTO((int, int[], int[]));

/* from file gen.c */

extern void do_indent PROTO((void));      /* indent to the current level */

/* Generate the code to keep backing-up information. */
extern void gen_backing_up PROTO((void));

/* Generate the code to perform the backing up. */
extern void gen_bu_action PROTO((void));

/* Generate full speed compressed transition table. */
extern void genctbl PROTO((void));

/* Generate the code to find the action number. */
extern void gen_find_action PROTO((void));

extern void genftbl PROTO((void));  /* generate full transition table */

/* Generate the code to find the next compressed-table state. */
extern void gen_next_compressed_state PROTO((char*));

/* Generate the code to find the next match. */
extern void gen_next_match PROTO((void));

/* Generate the code to find the next state. */
extern void gen_next_state PROTO((int));

/* Generate the code to make a NUL transition. */
extern void gen_NUL_trans PROTO((void));

/* Generate the code to find the start state. */
extern void gen_start_state PROTO((void));

/* Generate data statements for the transition tables. */
extern void gentabs PROTO((void));

/* Write out a formatted string at the current indentation level. */
extern void indent_put2s PROTO((char[], char[]));

/* Write out a string + newline at the current indentation level. */
extern void indent_puts PROTO((char[]));

extern void make_tables PROTO((void));    /* generate transition tables */

/* from file main.c */

extern void check_options PROTO((void));
extern void flexend PROTO((int));
extern void usage PROTO((void));

/* from file misc.c */

/* Add a #define to the action file. */
extern void action_define PROTO(( char *defname, int value ));

/* Add the given text to the stored actions. */
extern void add_action PROTO(( char *new_text ));

/* True if a string is all lower case. */
extern int all_lower PROTO((register char *));

/* True if a string is all upper case. */
extern int all_upper PROTO((register char *));

/* Bubble sort an integer array. */
extern void bubble PROTO((int [], int));

/* Check a character to make sure it's in the expected range. */
extern void check_char PROTO((int c));

/* Replace upper-case letter to lower-case. */
extern Char clower PROTO((int));

/* Returns a dynamically allocated copy of a string. */
extern char *copy_string PROTO((register const char *));

/* Returns a dynamically allocated copy of a (potentially) unsigned string. */
extern Char *copy_unsigned_string PROTO((register Char *));

/* Shell sort a character array. */
extern void cshell PROTO((Char [], int, int));

/* Finish up a block of data declarations. */
extern void dataend PROTO((void));

/* Flush generated data statements. */
extern void dataflush PROTO((void));

/* Report an error message and terminate. */
extern void flexerror PROTO((const char[]));

/* Report a fatal error message and terminate. */
extern void flexfatal PROTO((const char[]));

/* Convert a hexadecimal digit string to an integer value. */
extern int htoi PROTO((Char[]));

/* Report an error message formatted with one integer argument. */
extern void lerrif PROTO((const char[], int));

/* Report an error message formatted with one string argument. */
extern void lerrsf PROTO((const char[], const char[]));

/* Spit out a "#line" statement. */
extern void line_directive_out PROTO((FILE*, int));

/* Mark the current position in the action array as the end of the section 1
 * user defs.
extern void mark_defs1 PROTO((void));

/* Mark the current position in the action array as the end of the prolog. */
extern void mark_prolog PROTO((void));

/* Generate a data statment for a two-dimensional array. */
extern void mk2data PROTO((int));

extern void mkdata PROTO((int));    /* generate a data statement */

/* Return the integer represented by a string of digits. */
extern int myctoi PROTO((char []));

/* Return character corresponding to escape sequence. */
extern Char myesc PROTO((Char[]));

/* Convert an octal digit string to an integer value. */
extern int otoi PROTO((Char [] ));

/* Output a (possibly-formatted) string to the generated scanner. */
extern void out PROTO((const char []));
extern void out_dec PROTO((const char [], int));
extern void out_dec2 PROTO((const char [], int, int));
extern void out_hex PROTO((const char [], unsigned int));
extern void out_line_count PROTO((const char []));
extern void out_str PROTO((const char [], const char []));
extern void out_str3
      PROTO((const char [], const char [], const char [], const char []));
extern void out_str_dec PROTO((const char [], const char [], int));
extern void outc PROTO((int));
extern void outn PROTO((const char []));

/* Return a printable version of the given character, which might be
 * 8-bit.
extern char *readable_form PROTO((int));

/* Write out one section of the skeleton file. */
extern void skelout PROTO((void));

/* Output a yy_trans_info structure. */
extern void transition_struct_out PROTO((int, int));

/* Only needed when using certain broken versions of bison to build parse.c. */
extern void *yy_flex_xmalloc PROTO(( int ));

/* Set a region of memory to 0. */
extern void zero_out PROTO((char *, size_t));

/* from file nfa.c */

/* Add an accepting state to a machine. */
extern void add_accept PROTO((int, int));

/* Make a given number of copies of a singleton machine. */
extern int copysingl PROTO((int, int));

/* Debugging routine to write out an nfa. */
extern void dumpnfa PROTO((int));

/* Finish up the processing for a rule. */
extern void finish_rule PROTO((int, int, int, int));

/* Connect two machines together. */
extern int link_machines PROTO((int, int));

/* Mark each "beginning" state in a machine as being a "normal" (i.e.,
 * not trailing context associated) state.
extern void mark_beginning_as_normal PROTO((register int));

/* Make a machine that branches to two machines. */
extern int mkbranch PROTO((int, int));

extern int mkclos PROTO((int));     /* convert a machine into a closure */
extern int mkopt PROTO((int));      /* make a machine optional */

/* Make a machine that matches either one of two machines. */
extern int mkor PROTO((int, int));

/* Convert a machine into a positive closure. */
extern int mkposcl PROTO((int));

extern int mkrep PROTO((int, int, int));  /* make a replicated machine */

/* Create a state with a transition on a given symbol. */
extern int mkstate PROTO((int));

extern void new_rule PROTO((void)); /* initialize for a new rule */

/* from file parse.y */

/* Build the "<<EOF>>" action for the active start conditions. */
extern void build_eof_action PROTO((void));

/* Write out a message formatted with one string, pinpointing its location. */
extern void format_pinpoint_message PROTO((char[], char[]));

/* Write out a message, pinpointing its location. */
extern void pinpoint_message PROTO((char[]));

/* Write out a warning, pinpointing it at the given line. */
extern void line_warning PROTO(( char[], int ));

/* Write out a message, pinpointing it at the given line. */
extern void line_pinpoint PROTO(( char[], int ));

/* Report a formatted syntax error. */
extern void format_synerr PROTO((char [], char[]));
extern void synerr PROTO((char []));      /* report a syntax error */
extern void format_warn PROTO((char [], char[]));
extern void warn PROTO((char []));  /* report a warning */
extern void yyerror PROTO((char []));     /* report a parse error */
extern int yyparse PROTO((void));   /* the YACC parser */

/* from file scan.l */

/* The Flex-generated scanner for flex. */
extern int flexscan PROTO((void));

/* Open the given file (if NULL, stdin) for scanning. */
extern void set_input_file PROTO((char*));

/* Wrapup a file in the lexical analyzer. */
extern int yywrap PROTO((void));

/* from file sym.c */

/* Add symbol and definitions to symbol table. */
extern int addsym PROTO((register char[], char*, int, hash_table, int));

/* Save the text of a character class. */
extern void cclinstal PROTO ((Char [], int));

/* Lookup the number associated with character class. */
extern int ccllookup PROTO((Char []));

/* Find symbol in symbol table. */
extern struct hash_entry *findsym PROTO((register char[], hash_table, int ));

extern void ndinstal PROTO((char[], Char[]));   /* install a name definition */
extern Char *ndlookup PROTO((char[]));    /* lookup a name definition */

/* Increase maximum number of SC's. */
extern void scextend PROTO((void));
extern void scinstal PROTO((char[], int));      /* make a start condition */

/* Lookup the number associated with a start condition. */
extern int sclookup PROTO((char[]));

/* from file tblcmp.c */

/* Build table entries for dfa state. */
extern void bldtbl PROTO((int[], int, int, int, int));

extern void cmptmps PROTO((void));  /* compress template table entries */
extern void expand_nxt_chk PROTO((void)); /* increase nxt/chk arrays */
/* Finds a space in the table for a state to be placed. */
extern int find_table_space PROTO((int*, int));
extern void inittbl PROTO((void));  /* initialize transition tables */
/* Make the default, "jam" table entries. */
extern void mkdeftbl PROTO((void));

/* Create table entries for a state (or state fragment) which has
 * only one out-transition.
extern void mk1tbl PROTO((int, int, int, int));

/* Place a state into full speed transition table. */
extern void place_state PROTO((int*, int, int));

/* Save states with only one out-transition to be processed later. */
extern void stack1 PROTO((int, int, int, int));

/* from file yylex.c */

extern int yylex PROTO((void));

Generated by  Doxygen 1.6.0   Back to index